Home | Email

Company Profile

Induction Heating

Equipment

Induction Heating

Equipment Cont.

Power Supplies

Induction Tooling

Laboratory

Development

Cooling &

Quenching

Recirculating

Equipment

Induction Heating

Applications

Types of Induction

Heating Equipment

Advantages of

Induction Heating

History

Brazing, Soldering and Joining

Hardening and Heat Treating

Designing for Induction Heating

Dielectric Heating

Design of Induction Heating Coils

Brochures

Inquiry Form

 

Power Supplies

Power Supply - High Frequency Vacuum Tube

Designed for a parallel oscillating circuit with a very wide power 7 frequency operating range. This is a flexible power supply and is available in two configurations, high frequency triode and aperdiodic. The standard range for these generators are 12-400 kW / 8-450kHz.

Power Supply - Series Tuned IGBT

This unit is a voltage source series tuned IGBT transistor power supply and is designed for high voltage for high impedance loads. Frequency range is from 6 to 60 kHz.

Power Supply-Medium Frequency IGBT Parallel Tuned

This unit is designed for heating applications in the frequency range of 10 to 60 kHz. Basic circuit design is for a current source parallel tuned load. Power ratings can exceed 1 megawatt.

Power Supply - MOS Transistors High Frequency

The MOS transistor inverter is a high frequency 100 to 400 kHz converter. It acts as a current generator to a parallel resonance circuit. Power ratings at 2,3,6 and 12 kW.

 


Variable Frequency Transistor Power
Supply

Our transistor inverter is a 10 to 400 kHz high-frequency power supply.  It acts as a current source supplying a parallel resonant circuit.  The following is included:

 

• Front mounted

  circuit breaker

• Diode rectifier stage

• Low pass input filter

• Transistor high frequency section

• Ripple smoothing choke

• Full bridge output circuit

• High frequency output transformer

• Water cooled power section

• Electronic controls

• Internal timer

• Local or remote control

• Control interface on the front side of the 

  cabinet

• Emergency stop button

• Wide tuning range

Power Supply - Parallel Tuned Thyristors

This unit is a controlled current source power supply with a parallel tuned circuit designed to provide a wide range of power levels from 50 to 400kW. Frequency ranges from 150 to 10,000 Hz.

Power Supply - High Frequency MOS Parallel Tuned

This Unit is designed for heating applications in the frequency range of 70 to 400 kHz. Basic circuit design is for a current source parallel tuned load. Power ratings are 50 to over 1 megawatt at 100 to 400 kHz.

 

3578 Van Dyke • Almont, MI 48003
Tel: 810-798-2400 • Fax: 810-798-2402

Company Profile | Induction Heating Equipment | Induction Heating Equipment Cont. | Power Supplies | Induction Tooling | Laboratory Development | Cooling,& Quenching Recirculating Equipment | Induction Heating Applications | Types Of Induction Heating Equipment | Advantages of Induction Heating | History | Brazing, Soldering and Joining | Hardening and Heat Treating | Designing for Induction Heating | Dielectric Heating | Design of Induction Heating Coils | Brochures | Inquiry Form | Home | Email

 

Developed by Miller Media Inc (248) 528-3600